After the cleanup and drying are done, the repair work begins. Fire damage repair is the rebuild part of the job: replacing charred or smoke-damaged drywall, fixing flooring, repairing ceilings, and repainting. FlameWave Restoration handles fire damage repair for Newport Beach homes, after kitchen fires, electrical fires, and smoke damage. Fire damage is an extra silo of the business — Water Damage Restoration is the main service.
What Fire Damage Repair Covers
Fire damage repair is different from fire damage cleanup. Cleanup removes soot, smoke, and debris. Repair rebuilds what was damaged. Typical repair work includes:
- Drywall replacement and finishing
- Flooring repair or replacement
- Ceiling repair
- Cabinet and countertop repair in kitchens
- Trim, doors, and paint
- Electrical and plumbing fixtures that were damaged, repaired by the appropriate trades
Every repair starts only after the area is cleaned and dry. Painting over soot or building over damp framing will not hold.
Common Causes in Newport Beach Homes
- Kitchen fires. A stove or oven fire damages cabinets, countertops, and the ceiling above — and smoke spreads through the rest of the home. Kitchens in Balboa Peninsula cottages and Corona del Mar homes are often open to living areas, so the damage spreads fast.
- Electrical fires in older homes. Many 1950s–70s homes in Eastbluff, Dover Shores, and West Newport have aging wiring. A fire inside a wall can damage framing and drywall before anyone sees flames.
- Dryer vent fires. Lint buildup in a dryer vent can ignite and damage a laundry room and the rooms around it.
- Garage fires. A garage fire can damage the wall shared with the home and the ceiling above, along with stored items.
- Smoke-only damage. Sometimes there is no structural fire damage at all — just smoke and soot through the home. The repair is then mostly cleaning, sealing, and repainting.
What to Do First
- Wait until the home is declared safe to re-enter. Do not go back inside until the fire department says it is safe.
- Do not wipe soot. Soot smears and stains permanently if it is wiped with a household cloth.
- Call FlameWave Restoration at (949) 555-0100. Tell us which rooms were affected and what was damaged. Calls only.
- Take photos of the damage for your own records, once you are allowed back inside.
- Do not start repairs before cleaning and drying. Repairs over soot or damp framing will not last.
How the Job Works, Step by Step
- Inspection. We check what the fire, smoke, soot, and water touched, and what can be cleaned versus what must be replaced.
- Cleanup. Debris is removed, soot is cleaned from surfaces, and smoke odor is addressed.
- Water removal and drying. Water from firefighting is extracted and the structure is dried. Drying typically takes 3–5 days for most homes once standing water is out, and progress is checked by moisture readings.
- Removal. Drywall, flooring, and cabinets that cannot be cleaned and saved are removed.
- Repair. Drywall, flooring, trim, cabinets, and paint are repaired to match the room.
- Final check. The finished work is walked through with you.
FAQs
What is the difference between fire damage restoration and fire damage repair?
Restoration is the full process — cleanup, drying, and repair. Repair is the rebuild part that comes after cleanup. See fire damage restoration.
Can smoke-damaged drywall be cleaned, or does it need replacing?
It depends on how much soot soaked in. Light surface soot can often be cleaned. Drywall that absorbed heavy smoke or was heat-damaged usually needs to be replaced.
How long does fire damage repair take?
It depends on how many rooms were affected and how much material needs replacing. Cleanup and drying come first, then the repair work.
Will the smoke smell go away after repair?
Smoke odor is addressed during cleanup, at the source, before repairs begin. Painting over soot without cleaning it first will not remove the smell.
Do you repair kitchens after a cooking fire?
Yes. Kitchen fires are one of the most common fire jobs. Cabinets, countertops, and ceilings are repaired once the area is cleaned and dry.
Call FlameWave Restoration
For fire damage repair in Newport Beach, CA, call (949) 555-0100.
Internal links: Home · Fire Damage Restoration · Fire Damage Cleanup · Soot Removal